The Market Demand for Wireless RF Trailer Lights with Batteries Has Increased Sharply

Trailer lighting has long been an issue to owners and fleet managers alike, for years wiring has failed, corroded and the connections loosen to a point where it's always taken at least two trips from trailer to vehicle and back to check that the brake lights and indicators are working. For the last few years, and especially the past two years demand for wireless RF trailer lights with re-chargeable batteries (let alone that it has batteries and recharges off USB) has rocketed as it removes all the wiring harnesses, greatly reduces installation time and problems with hard wired systems almost to nothing.

Danyang Yeya Opto-Electronic Company Limited is a complete LED multifunctional light supplier and manufacturer, here are four reasons why the market demand for wireless RF trailer lighting has rocketed:

1. Elimination of Wiring Harness Failures and Corrosion

The 4-pin or 7-pin connector is what has always served as the system to transmit power and signals from the towing vehicle to the trailer. Unfortunately, the connector pin can be very susceptible to corrosion as it is usually exposed to road salts and moisture, as well as broken wires that are found under the insulation of the wires, all to the frustration of owners. The sudden inability to have working turn and brake lights while the driver does not know that is a risk for safety issues.

Our system wirelessly powers rechargeable batteries on the light pods themselves while using a transmitter to send the correct signals from your vehicle to the trailer. As the entire system is wirelessly operated, there is no harness to corrode or snag to the side of your vehicle. Danyang Yeya has the ideal system as their durable and weather-sealed light pods are simple to mount to the rear of any trailer in less than a minute. This is what the boat trailer, utility trailer, and construction equipment industries want!

2. Faster Installation and No Professional Wiring Required

Traditional trailer lights require many feet of wiring and are often attached to the chassis of the trailer and can take a long time to set up, even for just one trailer; a fleet operator with more than a handful of trailers would lose out greatly on time and expense.

With the installation and use of the wireless RF lighting system you only have to plug the transmitters into your tow vehicle's socket and attach the light pods to your trailer with magnets or clamps. That's it. Our systems require no tools to set up, no wires to cut and tape together, no zip ties and they can be installed in minutes. At Danyang Yeya, we've designed our wireless lighting systems for ease of use in multiple applications and they are capable of supporting trailers of up to 80 feet in length. A renter, a landscaping business, or an owner who frequently transports different trailers all love the quick set up time of the wireless lights, reducing your one hour set up time down to less than 5 minutes!

3. Battery Life and Solar-Assisted Charging

In the past, battery operated trailer lights only had enough power for 1-2 hours of use before needing to be plugged in. However, our system offers the highest quality long-lasting lithium-ion battery that can power each light pod for over 30-50 hours straight!

Our system goes above and beyond our competitors by including solar panels directly onto the light pods to ensure a more constant charge. Any time there is daylight, the solar panels charge the battery pack; there are never dead trailer lights, so you never have to remember to plug in your trailer. It is the best solution for a portable lighting system, as any of our clients using the trailer lights have never complained about them dying and never have to worry about whether they'll have any lights on their trailer while working on site.

4. Compliance with Safety Regulations and Remote Monitoring

Federal laws state that all trailers have to have operating tail, turn, and brake lights. This is typically checked during roadside inspections and drivers can expect to be pulled over and ticketed for trailer light malfunction.

Our systems are guaranteed to get you a functioning set of lights; but also with a monitoring light on the transmitter it allows the driver to see the status of their lights' charge level and signal quality while sitting in their cab. With the help of our systems that use your cell phone as an app to receive a low battery notification if it should occur. If your lights are at a low charge level, they should last you to your destination with no issues after just plugging it in for a short USB charge along the way, or by simply parking in a sunny location to get a solar charge for the lights. This allows your drivers to have a set of working trailer lights for inspections as well as an awareness of potential problems in the system.

Summary

The market demand for wireless RF trailer lights with batteries has increased significantly due to the elimination of wiring harness failure/corrosion, the rapid speed of installation without the use of a professional, and the longer battery life with solar charging. We manufacture these lighting solutions based on principles of first-quality components with strict quality control and support OEM/ODM design. Let Danyang Yeya Opto-Electronic Company Limited find a system for your business, whether you rent trailers, run a landscaping business or own a construction vehicle that regularly tows trailers; give us a call to learn more!